China Categories
All Categories
Medical/Industrial 50nm3/h Oxygen Plant 99.6% Purity Cryogenic Air Separation Plant Unit
Ask Latest Price
Model Number:KZ0-50
Certification:ISO9001;2008 CE cetificate
Price:negotiation
Payment Terms:T/T or L/C
Supply Ability:100sets month
Delivery Time:60working days after received your payment
Company Data
Verified Supplier
Business Type:
Manufacturer
Quality:
Quality Certifitation Available
Visit Website
Product Details
Company Profile
Product Details
99.6% Air Separation Plant KZO-50 Industrial Oxygen Plant With Low Energy
ConsumptionConsumption
- Basic Design Condition(Confirmed by User later on)
Ambient Design Condition:
Ø Ambient pressure
101.3kPa(A)
Ø Ambient temperature
30 ºC
Ø Relative humidity
75%
Ø Ambient oxygen content
20.95%O2
Ambient Temperature:
Ø Annual average temperature
18.4 ºC
Ø Extreme maximum temperature
40 ºC
Ø Extreme minimum temperature
-1.8 ºC
Ø Average temperature in summer
30 ºC
Ø Average temperature in winter
7.5 ºC
Ø Seismic force
＜6 Mercalli Scale
Ø Elevation
50m
Ambient Air Composition at the End-user’s Site:
Ø CO2
≤350 ppm
Ø SO2
≤0.44 mg/m3
Ø H2S
≤2.3 mg/m3
Ø CH4
≤5.2mg/m3
Ø C2H2
≤0.03 ppm
Ø CnHm(excl. C2H2)
≤5 ppm
Ø Dust content
≤10mg/m3
Circulating water(notice:not for fan-cooled plant)
Ø Inlet water temperature
30℃
Ø Inlet water pressure
0.4 MPa(G)
Ø Maximum pressure drop
0.2 MPa(G)
Ø Maximum temperature rise
10℃
Ø Cooling water turbidity
12 mg/L
Ø PH value
7.2
Ø Total rigidity
2.5
Ø Fouling factors
0.0004 m2 hºC/ K.W
Electricity Supply:
Ø HV(notice: only for plant with HV)
10,000V±5%(3phase 3wire)
Ø LV
380V/220V±5% (AC 3phase 4 wire)
Ø Frequency
50±0.5HZ
Stand-by Instrument Air to be Supplied by Client (for plant start-up)
(notice: only for plant with pneumatic valves)
Ø Pressure
0.5 MPa(G)
Ø Temperature
≤30 ℃
Ø Dew point
＜-40℃
Ø Flow rate
～m3/h
Ø Requirement
Oil free
- Main technical data
Production, Purity, Pressure (Out of the Cold Box):
medium
Production (Nm3/h)
Purity
Pressure (MpaG)
Oxygen
50±5%
≥99.6%O2
～15
Product Production State(0 ºC, 101.325Kpa)
Start-up pressure
1.3MPa(G)
Running period
12months
Start time needed
～10hours
- Process Brief Description
Ø Raw material air is put through a filter to remove dust and mechanical matter, inhaled by air filter from the atmosphere to remove dust and other mechanical impurities, and enter into injection screw air compressor, through the secondary compression to 1.3MPa (gauge pressure), cooled by after-cooler, enter into the precooling unit,and precooling to 5 ~ 10 ºC, and enter into the oil mist filter group after removed oil then to the switch type molecular sieve purifier, the moisture in the air, carbon dioxide, and hydrocarbons are absorbed. Molecular sieve purifier is composed of two filling molecular sieve containers, one is in use, and the other one is regenerating the molecular sieve after waste nitrogen in the cold box heated by electric heater.
After air purification, small part as bearing gas of the gas-bearing expansion turbine, the rest of the air is divided into two parts. Most of air gets into main heat exchanger of cold box, and be cooled by expended backflow waste nitrogen. The other small part of air enters into high pressure liquid oxygen evaporation heat exchanger of cold box, and evaporation cooling by the liquid oxygen. Then two parts of air converge in the main heat exchanger central, be cooled again and go into the main heat exchanger air side after reaching certain moisture content. The air is drew out after condensed and liquefied ,through Sub-cooler and throttle to the top of fractionating column as backflow. Liquid oxygen is pumped out of main heat exchanger after the liquid oxygen pump pressurized into the hyperbaric oxygen heat exchanger, be heated and vaporized by air, reheat to normal temperature and discharge out of cold box, filling station fills bottles and provide to users. Pressurized waste nitrogen draw out the top of upper column, after preliminary reheat then expand in gas-bearing turbo expander , expanded waste nitrogen reheat in main heat exchanger, and then out of the cold box as regeneration gas of molecular sieve adsorber. For the safety of equipment operation, small part of liquid air discharge from column regularly to avoid hydrocarbons especially acetylene gathered.Instrument Control System
Ø The overall design principle for instrumentation & electrical design of the KZO-50 ASU is local control on each individual unit, with detailed description as follows:
Ø Air Compressor, pre-cooler and so on have electronic control cabinet and operation plate with themselves, set alarm and operate button.
Ø Molecular sieve purifier, electrical heater, turbo expander and distillation column set two local cabinet which temperature, flow rate, liquid level all adopt digital indicator, molecular sieve sequence switch adopts Siemens PLC automatic control.
Scope of supply: (Note: Take manufacturer’s final actual supply as standard)
Qty.
Ø Local cabinet of purifier
1
Ø Local cabinet of oxygen plant
1
Ø Differential pressure transmitter and three valves group
2
Ø Standard orifice plate
1
- Scope of Supply
1. Oil screw air compressor
1 Set (water cooled type)
Technical Parameters (Note: Take the final design parameters as standard)
Manufacturer
Atlas Copco or Ingersoll
Type
GA75
Discharge flow rate
10.3m3/min
Discharge Pressure
1.3MPa(G)
Motor power
75KW
Scope of supply(Note: Take manufacturer’s final actual supply as standard)
quantity
Ø Main motor
1
Ø Compressor
1
Ø Electronic control cabinet
1
Ø Spare parts
1
Picture(Note : The picture for reference only, take material object as standard)
2. Air Pre-cooler
1 Sets (Air Cooling)
Technical Parameters (Note: Take the final design parameters as standard)
Manufacturer
Siad
Type
GAYL-618/13
Flow rate
618m3/h
Inlet pressure
≤1.3MPa(G)
Air inlet temperature
≤40℃
Air outlet temperature
～8℃
Motor power
～6KW
Scope of supply(Note: Take manufacturer’s final actual supply as standard)
Qty.
Ø Inlet refrigerate compressor
1
Ø Condenser
1
Ø Evaporator
1
Ø Pipe and valve
1
Ø Refrigerate automatic element
1
Ø Control plate of electrical equipment
1
Ø Operation instrument board
1
Ø Water separator
1
Ø Automatic drainer
1
3. Oil mist filter
1 Set
Technical Parameters (Note: Take the final design parameters as standard)
Filter element
Hankison or other equal brands
Filter element
618m3/h
Air flow rate
≤1.3MPa(G)
Inlet pressure
≤40℃
Air Inlet temperature
≤0.001ppm
Note: Skid-mounted frame design with Air Pre-cooler
Picture(Note : The picture for reference only, take material object as standard)
4. Air purification system
1 Set
Technical Parameters (Note: Take the final design parameters as standard)
Manufacturer
Siad
Type
HXK-618/13
Air flow rate
618m3/h
Working pressure
1.3MPa
Suction temperature
12℃
Adsorption time
8h
Temperature of resurgent gas inlet adsorber
170℃
Temperature of resurgent gas outlet adsorber
100℃
Electrical heat power
～15KW
Scope of supply: (Note: Take manufacturer’s final actual supply as standard)
qty
Ø Molecular sieve vessel(incl. M/S)
2
Ø Electrical heater
1
Ø Filter
1
Ø Pipe valves
1
Ø Insulation material
1
Note: Above is skid-mounted frame design.
Picture(Note : The picture for reference only, take material object as standard)
5. Fractionating column
1 Set
Technical Parameters (Note: Take the final design parameters as standard)
Manufacturer
Siadgas
Type
F0-50
Model
Single column
Dimension
～2000×2300×7500mm
Scope of supply: (Note: Take manufacturer’s final actual supply as standard)
qty
Ø Main heat exchanger
1
Ø Sub-cooler
2
Ø Condensation evaporator
1
Ø High-pressure heat exchanger
1
Ø Oxygen column
1
Ø Cold box
1
Ø Perlite
ENOUGH
Picture(Note : The picture for reference only, take material object as standard)
6. Turbo expander
1 Set of 2 PCS
Technical Parameters (Note: Take the final design parameters as standard)
Manufacturer
Suzhou Xida or Jiangxi Oxygen
Working medium
Waste nitrogen
Flow rate
450Nm3/h
Inlet pressure
～0.371MPa(A)
Outlet pressure
0.126MPa(A)
Inlet temperature
132K
Brake mode
Fan brake
Adiabatic efficiency
≥72%
Scope of supply: (Note: Take manufacturer’s final actual supply as standard)
Qty.
Ø Turbo expander
2
Ø Expansion joint
4
Ø Expander inlet filter
2
Ø Refine filter
1
Ø Air filter
2
Ø Silencer
2
Note: Skid-mounted frame design with Fractionating column
Picture(Note : The picture for reference only, take material object as standard)
7. Cryogenic liquid oxygen pump
1 Set
Technical Parameters (Note: Take the final design parameters as standard)
Type
horizontal ,piston, gear drive
Working medium
liquid oxygen
Flow rate
60～70L/h
Inlet pressure
～0.095MPa(A)
Outlet pressure
～15MPa(A)
Motor power
～3KW
Scope of supply: (Note: Take manufacturer’s final actual supply as standard)
Qty.
Ø Pump head
1
Ø Transmission case
1
Ø Electric motor
1
Ø Electric control cabinet
1
Picture(Note : The picture for reference only, take material object as standard)
8. Oxygen filling device (24 heads)
1 Set (incl. copper pipe)
Picture(Note : The picture for reference only, take material object as standard)
9. Unit equipment connected process pipe(being removed after factory pre-assembly)
1 Set
| O2 output | 50nm3/h |
| O2 purity | >99.6% |
| Start-up pressure | 1.3mpa |
| Running period | 12 months |
| Starting time | 0-10hours |
| Requirement | Oil free |
| High voltage | 10000V |
| Low voltage | 380V/220V |
Company Profile
Beijing Silk Road Enterprise Management Services Co.,LTD
Beijing Silk Road Enterprise Management Services Co.,LTD is a joint venture enterprise specializing in the production of cryogenic equipment, which is the subsidiary company of Tai Wan Lian Su group. Registered capital is 10,000,000 Yuan (about 1,600,000 USD ). Founded in 1996, Tailian has been doing research and development for various technologies, manufacturing of equipment, sales and service in the filed of cryogenics in both domestic and foreign markets. Owning advanced technology and producing facilities, we also have dozens of experienced specialists for cryogenic and air separating area for years. Tailian has been the supplier of dozens of world famous transnational companies, such as China nuclear power engineering Co., Ltd, China Aerospace Science and Technology Corporation, Xinjiang Guanghui Industry Investment Group Company Limited, Sinopec Group, China National Petroleum Corporation（CNPC）, Linde Group, France Air Liquid, China National Offshore Oil Corporation, Coca-Cola,Praxair，Hang Yang Group, Pepsi, Wahaha Group, Hafei Aviation Industry Co., Ltd, ENN Energy Holding Group, Qingdao Beer, Budweiser, Shell, CIBA and B.O.C. etc. Our annual producing capability of liquid pump is round 800-900 sets, and so far we have finished more than 10,000 sets cryogenic liquid pumps to the customers. In the past few years, our productions have been exported to several countries, such as Vietnam, Kazakhstan, Pakistan, Congo, Bangladesh, Egypt, Iraq, Cambodia, Angola, Philippines, India, Venezuela, Indonesia and Lao, etc.
Beijing Silk Road Enterprise Management Services Co.,LTD is specialized in producing cryogenic liquid pumps for LNG, LPG, liquid oxygen, liquid nitrogen, liquid argon, liquid carbon dioxide, liquid ammonia and methane as well as cryogenic liquid vaporizer, oxygen compressor, carbon dioxide equipment and gas pressure regulating system. Beside that, we also undertake turnkey project of LNG/L-CNG vehicle fueling station, LNG station, LNG peaking-use evaporating station, LNG gas cylinder fueling station and undertake coal to gas project and all other industrial gas applications. Tailian also researches and develops, produces, sales and services for the equipment mentioned above.
Tailian has got the special equipment manufacturing license (A-grade pressure pipes) of People’s Republic of China and approval certificate of ISO9001：2008. Tailian is one of the members in 30 companies who got the title of ‘Golden Reputation’ in the First China Integrity Network Summit. And We are also the member “ Union of Golden Reputation”. With advanced technology, superior quality and value of after sale service, Tailian earns trust from lots of transnational gas companies both at home and abroad.
Sharp tools make good work. The administrator of Tailian realized that only good management, idea or good talent are not enough. Advanced facility must be adopted to ensure powerful manufacturing prowess and superior quality of our products. We purchased world advanced producing facilities(such as process center and CNC) and have experienced specialists, which can guarantee the good quality of products.
Our company persists in the principle of customer first, sincere service, products sale over the country, and export to Southeast Asia and the Middle East. Our products are mainly used in petroleum, chemical, nuclear power plants, iron and steel, electric power, military, aerospace and other industries.
Send your message to this supplier
You May Like
Blue Oxygen / Natural Gas Compressor / Air Separation Plant 3795×3029×2420mm
250m3/h Low Pressure 99.6% Air Separation Plant Oxygen Plant Machine
600L/h High Purity 99.6% Liquid Nitrogen Air Separation Plant For Industrial
Cryogenic 900nm³/h Liquid Oxygen /150nm3/h Oxygen 30nm3/h Liquid Argon Plant Air Separation Plant With Low Energy
99.6% Liquid 100nm3/h Argon/3000nm3/h Oxygen Plants Air Seperation Plant With Low Energy Consumption
High Purity 99.6% 100nm3/h Industrial Cryogenic Air Separation Plant
99.6% Industrial 200nm3/h Oxygen Plant /800nm3/h N2 Plant Air Separation Plant With CE Certificate
High Purity 1400nm3/h Liquid O2 / 2000nm3/h Liquid N2 Air Separation Plant Oxygen/nitrogen Generating Machine
Liquid 100nm3/h O2 Liquid Argon 200nm3/h/Liquid O2 500nm3/h Liquid Argon 160nm3/h Plant Air Separation Plant
Medical Cryogenic Air Separation Plant
Low Consumption Air Separation Unit
Inquiry Cart
0