
Deep Hole Drilling Equipments SRC040 Bits For Mining And Water Well Drilling
Products Introduction
Reverse Circulation (RC) drilling is used to collect mineral and
rock samples quickly and efficiently using a large rotary drill and
air compressor. Reverse Circulation (or RC) drilling is one of the
most frequently used methods of drilling used across the world as
it is more cost effective and efficient then other methods of
drilling. When compared to RAB (Rotary Air Blast) and diamond
drilling, RC drilling seems to be somewhere in the middle when it
comes to cost, time, quality of samples, technique and depth.
Applications:
RC drilling is a technique used in the majority of stages of mine
development.
As it is cheaper than diamond core drilling, it is often used in
first stage exploration mining to delineate a potentially
extractable ore body. It is also preferable to RAB or air-core
drilling when trying to reach great depths, but RC drilling is
slower and more expensive than either of these two methods.RC drilling is also consistently used during in-pit grade control
and the development stage of an ore body.
Shank can be available:
Items Description:
Solloc RC Hammers Specifications | ||||||||
Hammer Size | Hammer | Bit Shank | Hole Range (mm) | External Diameter (mm) | Length (without bit) mm | Weight (N.W.) kgs | Connection Thread | Working Pressure |
3" | SRC531 | SRC531 | 84-100 | 81 | 1069 | 29 | 3" Remet | 1.0-3.0Mpa |
3" | SRC035 | SRC035 | 84-105 | 85 | 1075 | 35 | 3" Remet | 1.0-3.0Mpa |
4 1/2" | SRC004 | SRC004 | 111-127 | 107 | 1252 | 52 | 3.5"-4" Remet 4" Metzke | 1.0-3.0Mpa |
4 1/2" | SRC540 | SRC540 | 111-127 | 107 | 1252 | 52 | 3.5"-4" Remet 4" Metzke | 1.0-3.0Mpa |
5" | SRC040 | SRC040 | 113-130 | 109.5 | 1191 | 57 | 3.5"-4" Remet 4" Metzke | 1.0-3.0Mpa |
5" | SRC542 | SRC542 | 113-130 | 109.5 | 1191 | 57 | 3.5"-4" Remet 4" Metzke | 1.0-3.0Mpa |
5" | SRC543 | SRC543 | 120-135 | 116 | 1191 | 62 | 3.5"-4" Remet 4" Metzke | 1.0-3.0Mpa |
5" | SRC545 | SRC545 | 122-135 | 117.5 | 1261 | 65 | 4"-4.5"Remet 4"-4.5" Metzke | 1.5-3.5Mpa |
5 1/2" | SRC547 | SRC547 | 130-146 | 124.5 | 1270 | 71 | 4.5"Remet 4.5" Metzke | 1.5-3.5Mpa |
5 1/2" | SRC052 | SRC052 | 130-146 | 124.5 | 1270 | 71 | 4.5"Remet 4.5" Metzke | 1.5-3.5Mpa |
5 3/4" | SRC054 | SRC054 | 130-146 | 124.5 | 1270 | 85 | 4.5"Remet 4.5" Metzke | 1.5-3.5Mpa |
Metzke, Remet thread is available! | ||||||||
Any special type shank of RC Hammer will be available by requests. |
Our Service:
1.Pre-sale service:
Act as a good adviser and assistant of clients enable them to get
rich and generous returns on their investments .
(1)Select equipment model.
(2)Design and manufacture products according to customer‘s needs;
(3)Train technical personnel for clients .
2.Services during the sale:
(1)Pre-check and accept products ahead of delivery .
(2)Help clients to draft solving plans .
3.After-sale services:
Provide considerate services to minimize clients' worries.
(1)Complete After-sales service,professional engineers available to
service machinery at home or oversea.
(2)24 hours technical support by e-mail.
(3)Other essential technical services.
Quality warranty:
Our hammers are made of high quality steel and all spares are
inspected strictly before shipping. We have quickly responses for
your complaint and suggestion.
Package:
Using ply-wooden cases and pallet for exporting to protect products
and avoid the damagement during transportation. Also we can
customize package according to your special requests.
Transportation:
By air, By Express or By sea according to your requests
Changsha Sollroc Engineering Equipments Co., Ltd
Sollroc, with more than 10 years of experience, is one of the prefessional manufacturer and supplier of high performance rock drilling tools like, DTH hammers and bits, RC hammers and bits, ODEX system, symmetrix system, DTH drill rods and top hammer drilling tools, our tools are widely used in different drilling applications including mining, quarring, water well drilling and etc.
We can provide specifications:
DTH hammers range: 3"-12’’
DTH bits range: 90mm - 600mm
DTH opener bits: 4"-10" from 82/165mm to 445/660mm
Shanks : BR series, DHD, COP, Mission, Mach; SD; QL; Numa.
Tophammer tools
Thread: R22, R25, R28, R32, R35, R38, T38, T45, T51, ST58, GT60,GT68
Button bit face design: Flat face, drop centre,
Button bit body type: Normal and Retrac
Button bits diameters: 45mm-152mm