Polycrystalline Diamond Compact (PDC) Matrix Body Bits For Very Hard Rocks For Oil Drilling

Polycrystalline diamond compact (PDC) Matrix body bits for Very Hard Rocks for oil drilling

PDC drill bits

Polycrystalline diamond materials, for use in polycrystalline diamond compact (PDC) bits, are one of the most important material advances for oil drilling tools in recent years. Fixed-head bits rotate as one piece and contain no separately moving parts. When fixed-head bits use PDC cutters, they are commonly called PDC bits. Since their first production in 1976, the popularity of bits using PDC cutters has grown steadily, and they are nearly as common as roller-cone bits in many drilling applications.

Polycrystalline diamond compact (PDC) styles

PDC bits are designed and manufactured in two structurally dissimilar styles (Fig. 1 and Fig. 2):

Matrix-body bit

Steel-body bits

The two provide significantly different capabilities, and, because both types have certain advantages, a choice between them would be decided by the needs of the application.

Polycrystalline diamond compact (PDC) styles

PDC bits are designed and manufactured in two structurally dissimilar styles (Fig. 1 and Fig. 2):

Matrix-body bit

Steel-body bits
The two provide significantly different capabilities, and, because both types have certain advantages, a choice between them would be decided by the needs of the application.

Fig. 1—Matrix-body bit.

Fig. 2—Steel-body bit.

Matrix-body

“Matrix” is a very hard, rather brittle composite material comprising tungsten carbide grains metallurgically bonded with a softer, tougher, metallic binder. Matrix is desirable as a bit material, because its hardness is resistant to abrasion and erosion. It is capable of withstanding relatively high compressive loads, but, compared with steel, has low resistance to impact loading.

Matrix is relatively heterogeneous, because it is a composite material. Because the size and placement of the particles of tungsten carbide it contains vary (by both design and circumstances), its physical properties are slightly less predictable than steel.

Steel-body

Steel is metallurgically opposite of matrix. It is capable of withstanding high impact loads, but is relatively soft and, without protective features, would quickly fail by abrasion and erosion. Quality steels are essentially homogeneous with structural limits that rarely surprise their users.

Design of matrix and steel-body bits

Design characteristics and manufacturing processes for the two bit types are, in respect to body construction, different, because of the nature of the materials from which they are made. The lower impact toughness of matrix limits some matrix-bit features, such as blade height. Conversely, steel is ductile, tough, and capable of withstanding greater impact loads. This makes it possible for steel-body PDC bits to be relatively larger than matrix bits and to incorporate greater height into features such as blades.

Advantage of matrix-body PDC bits

Matrix-body PDC bits are commonly preferred over steel-body bits for environments in which body erosion is likely to cause a bit to fail. For diamond-impregnated bits, only matrix-body construction can be used.

The strength and ductility of steel give steel-bit bodies high resistance to impact loading. Steel bodies are considerably stronger than matrix bodies. Because of steel material capabilities, complex bit profiles and hydraulic designs are possible and relatively easy to construct on a multi-axis, computer-numerically-controlled milling machine. A beneficial feature of steel bits is that they can easily be rebuilt a number of times because worn or damaged cutters can be replaced rather easily. This is a particular advantage for operators in low-cost drilling environments.

Development of PDC bits

Fortunately, both steels and matrix are rapidly evolving, and their limitations are diminishing. As hard-facing materials improve, steel bits are becoming extremely well protected with materials that are highly resistant to abrasion and erosion. At the same time, the structural and wear-resisting properties of matrix materials are also rapidly improving, and the range of economic applications suitable for both types is growing.

Today’s matrix has little resemblance to that of even a few years ago. Tensile strengths and impact resistance have increased by at least 33%, and cutter braze strength has increased by ≈80%. At the same time, geometries and the technology of supporting structures have improved, resulting in strong, productive matrix products. Fig. 3 describes PDC bit nomenclature.

Fig. 3—PDC bit nomenclature.

Polycrystalline diamond compact (PDC) cutters

Diamond is the hardest material known. This hardness gives it superior properties for cutting any other material. PDC is extremely important to drilling, because it aggregates tiny, inexpensive, manmade diamonds into relatively large, intergrown masses of randomly oriented crystals that can be formed into useful shapes called diamond tables. Diamond tables are the part of a cutter that contacts a formation. Besides their hardness, PDC diamond tables have an essential characteristic for drill-bit cutters: They efficiently bond with tungsten carbide materials that can be brazed (attached) to bit bodies. Diamonds, by themselves, will not bond together, nor can they be attached by brazing.

Synthetic diamond

Diamond grit is commonly used to describe tiny grains (≈0.00004 in.) of synthetic diamond used as the key raw material for PDC cutters. In terms of chemicals and properties, manmade diamond is identical to natural diamond. Making diamond grit involves a chemically simple process: ordinary carbon is heated under extremely high pressure and temperature. In practice, however, making diamond is far from easy.

Individual diamond crystals contained in diamond grit are diversely oriented. This makes the material strong, sharp, and, because of the hardness of the contained diamond, extremely wear resistant. In fact, the random structure found in bonded synthetic diamond performs better in shear than natural diamonds, because natural diamonds are cubic crystals that fracture easily along their orderly, crystalline boundaries.

Diamond grit is less stable at high temperatures than natural diamond, however. Because metallic catalyst trapped in the grit structure has a higher rate of thermal expansion than diamond, differential expansion places diamond-to-diamond bonds under shear and, if loads are high enough, causes failure. If bonds fail, diamonds are quickly lost, so PDC loses its hardness and sharpness and becomes ineffective. To prevent such failure, PDC cutters must be adequately cooled during drilling.

Diamond tables

To manufacture a diamond table, diamond grit is sintered with tungsten carbide and metallic binder to form a diamond-rich layer. They are wafer-like in shape, and they should be made as thick as structurally possible, because diamond volume increases wear life. Highest-quality diamond tables are ≈2 to 4 mm, and technology advances will increase diamond table thickness. Tungsten carbide substrates are normally ≈0.5 in. high and have the same cross-sectional shape and dimensions as the diamond table. The two parts, diamond table and substrate, make up a cutter (Fig. 4).

Fig. 4—PDC cutter construction

File usage

The following 2 pages link to this file:

PDC drill bits
PEH:Introduction to Roller-Cone and Polycrystalline Diamond Drill Bits

Forming PDC into useful shapes for cutters involves placing diamond grit, together with its substrate, in a pressure vessel and then sintering at high heat and pressure.

PDC cutters cannot be allowed to exceed temperatures of 1,382°F [750°C]. Excessive heat produces rapid wear, because differential thermal expansion between binder and diamond tends to break the intergrown diamond grit crystals in the diamond table. Bond strengths between the diamond table and tungsten carbide substrate are also jeopardized by differential thermal expansion.

Important factors to consider before the use and design of PDC bits

. PDC bit design principles
. PDC bit profile
. PDC bit configurations
. Bit hydraulics
. Bit economics
. Bit classification
. Understanding of operating practices and conditions the bit will be exposed to.

Rotary drill bits

PEH:Introduction to Roller-Cone and Polycrystalline Diamond Drill Bits

For more information please contact:

ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED

Skype: ROSCHEN.TOOL , ROSCHEN_GROUP

WeChat: +86-137 6419 5009 ; +86-135 8585 5390

WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390

Email: roschen@roschen.com ; roschen@roschen.net

Website: http://www.roschen.com ; http://www.roschen.net

http://www.roschen.cn ; http://www.roschendrill.com

Keywords:

PDC Bit
PDC Bit torque
PDC Bit grading
PDC Bit for sale
PDC Bit sizes
PDC Bit definition
PDC Bit types
PDC Bit bize chart
diamond impregnated steel
hughes christensen
baker hughes bit catalog
well drilling bits used craigslist
pdc drill bits for sale
oilfield drill bits
pdc bits for sale
pdc bits drilling
pdc bit manufacturers
pdc bit definition
PDC Drill Bits
Baker Hughes PDC Drill Bits
Well drilling
PDC Drill Bit
PDC Drill Bit repair
PDC Drill Bit manufacturers
PDC Drill Bit companies
PDC Drill Bits houston
PDC Drill Bits useful life
PDC Drill Bits houston tx
PDC Drill Bits for sale
pdc drill bit manufacturers
pdc rock bit
baker hughes bit catalog
well drilling bits used craigslist
pdc bits for sale
pdc drill bit design
pdc drill bits for sale
drill bit technology
PDC Drill Bits For Rotary Drilling Rigs

PDC Bits
PDC Bits for sale
PDC Bit sizes
PDC Bits colorado
PDC Bits drilling
PDC Bits made in america
PDC Bit size chart
PDF bits

pdc bit manufacturers
pdc bits for sale
pdc cutters
pdc bit definition
infinity pdc bits
pdc bit companies
pdc bit sizes
pdc bits drilling

PDC drill bits
PDC Drill Bits | Baker Hughes

Well drilling

Ulterra PDC Drill Bits & Downhole Tools For Oil & Gas
Standard PDC Drill Bits

pdc drill
pdc drill bit
pdc drill bits
pdc drill bit repair
pdc drill bit manufacturers
pdc drill bit companies
pdc drill bits houston
pdc drill bit useful life

pdc drill bit
pdc drill bits for sale
pdc drill bit companies
pdc drill bit manufacturers
PDC Bits
PDC Drill Bits
PDC drill bits

pdc drill bit manufacturers
pdc bits for sale
pdc drill bit companies
pdc drilling
pdc drill bits for sale
pdc bit companies
drill bit technology
pdc bit sizes
pdc drilling bit
pdc drilling bits
pdc drilling bit chip generation rates
pdc drilling bits manufacturers east europe
drilling with pdc bits
drilling bits pdc usa
pdc bit sizes
pdc bit companies
pcd bit

 ROSCHEN GROUP

ROSCHEN Group has the world class advanced equipment like 12000 tons forging, metal processing plant, heat treatment workshop, numerical control plant, Advanced five-axis machining center, etc. professional technical and skilled team to ensure mining, mineral tools, equipment products quality stable and reliable.

ROSCHEN Group Limited is a manufactory with years of research and development for the mining, mineral tools, equipment. We are capability to produce high performance world class products and control excellent quality. Our main product includes tricone bit, diamond core bits, drill pipe, core barrel, TCI tricone bit, mill tooth tricone bit, RC hammer, DTH bit, etc.

ROSCHEN Manufactory PROCESS

ROSCHEN Sales Value Growing Up!

ROSCHEN'S MISSION

1. Strive to create and supply Best quality products for the industry that last longer than the average products.

2. Provide excellent service for our clients.  24 hour-7 days /week schedule to get our clients what they need – FAST.