
1. Composition:
Core Material: EPS, Cement and fly ash core.
Surface materials: Fiber reinforced Calcium silicone board or Cement Calcium
Silicone Board.
2. Specification:
L*W*T: 2440mm*610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm.
1220mm* 610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm/180mm.
3. Application:
Interior and exterior partition on steel or concrete structure building.
For New Construction, Additions,or Renovations.
4. Special Features:
Different Wall Thickness: 60mm, 75mm, 90mm,100mm, 120mm, 150mm,180mm.
Maximum width: 610mm.
Length: According to your demands, engineering requirements, and shipment
conditions.
5. Advantages:
· Light weight
· Good sound insulated
· Heat Insulated
· Waterproof/ Water fast : Near about 0% moisture absorption.
· Fire proof.
· Energy Efficient
· Environmental, Ecofriendly.
· Civilized and convenient construction
· High Intensity without deformation.
Magnesium Oxide Board Machine with fashionable design, reasonable structure, stable running manufactured board of even thickness in large production once through double- roller-extruding technology. This production line is equipped with shaking device which remove inside and outside air bubble, so our board is more compact. In addition, we use the no-woven cloth as the separating film to increase the toughness and strength of the board. The machine can be adjusted arbitrarily, and then produce the board with the thickness of 2-60mm, the biggest width of 1, 300mm and unlimited length. So you can adjust the thickness of board at will.
At the end of 21st century, many cities in China were implementing new rural construction, almost at the same time, our country put forward Western development plan, fiber cement board has been developed rapidly because of its own high quality, the support of the state government policy, the rapid rising of boards demanding. And fiber cement boards have the advantages of protection against mould, insects and termites, water resistant, anti-aging and etc, and the development space of it will be infinitely wide. fiber cement production line
2- panel machine is a movable producing panel machine which need platform to move during producing.
3- Thin steel wire is put inside the panel in advance before producing. And this process is easy, not using tensile machine.
4- The machine is applied to the high tech. Extrusion technique can make the panels more density and surface much smoother.
Providing overall solutions about mgo board, EPC project, seperate machinery, products export. Including technology design, manufacturing, installation,commissioning, training, service, etc.
Outline.Length: 18m width: 1.5m
Output: 1800peices per day (8 working hours).
Operator: One production line needs 15-18 workers.
Specification of board: 3,4,5,6,8,9,10,12,15mm thickness.
This production can produce two kinds of MGO board: common MGO board and coated MGO board.
Such board making machine has one 3KW timing electromotor and one 2.2KW electromotor.
After-sale
After purchased the equipment, we will teach relevant technology
for free, and will go to your factory for installation and testing
until you can produce the qualified product by yourself. Our
company will train 2-3 technical personnel for free until he can
get the skill. We will take responsibility for provide technical
consultation and following-up service for a long time, the
equipment warranty period is one year.
1. We offer Technical Support until the workers know how to operate.
2. We provide free answers about all kinds of questions about the production,if necessary,pls call us freely.
3. We provide lifelong guidance about our equipment.visit client in regular times.
4. Provide equipment easy-broken pasts year in year.to insure your machine can working continuously.
Test we can do before delivery:
Fireproof board test report Test standard: JC688_2006 < MGO board standard > | |||||||
Specification | 10mm | Produce date | 2014.08.06 | Test date | 2014.09.01 | ||
Test item | Technical requirement | Test results | Results | ||||
Density (t/m 3 ) | 1.0 | Qualified | |||||
Bending strength(MPa) | ≥10 | 14 | Qualified | ||||
Impact strength (KJ/M2) | ≥2.5 | 6.5 | Qualified | ||||
Moisture resistance | No moisture | No moisture | Qualified | ||||
Water content (%) | ≤8 | 5.7 | Qualified | ||||
Contraction rate when heated (%) | ≤0.3 | 0.10 | Qualified | ||||
Expansion when put into water (%) | ≤0.6 | 0.13 | Qualified | ||||
Water absorption (%) | ≤28 | 10 | Qualified | ||||
Crisp coefficient | ≥0.7 | 1.3 | Qualified | ||||
Warp when heated (‰) | ≤3(Corporation standard ) | 0.12 | Qualified | ||||
Put out of nails | E<6 | 6<e<10 | E >10 | 25 | Qualified | ||
≥25 | ≥20 | ≥15 |
mgo board machinemgo board production line
Magnesium oxide board have been used primarily as fireproof materials for walls and ceilings in office buildings, apartment complexes, residential constructions, hotels, theatres, restaurants, railway stations, airports, scientific research institutions, schools, hospitals, and stadiums. Some patterned products have been used as decorative boards.
It also can be used as an interlayer for building, movable partitions, sound-absorbing structures, sound insulation structures, heat insulation and preservation structures, sign boards, fireproof partition walls, low fencing partitions, fireproof pipeline, fireproof doors, cornice baffle boards, public restroom dividers, baseboards, truck cabinets and billboards etc.
Shandong Chuangxin Building Materials Complete Equipments Co., Ltd
Shandong Chuangxin Building Materials Machinery Co., Ltd., as a new
and high technology enterprise registered at provincial industrial
and commercial department and a modern group enterprise integrated
with scientific research, processing and trade mainly focus on
research, development and popularization of decorating technique,
building materials technology and machinery. Its many patent
products were sold throughout China and some were exported to
Russia, Southeast Asia, Hong Kong and Taiwan. We have had rich
assets and intellectual property rights after many years, and in
July 2004, our products were awarded as many laurels such as State
Key New Product by State Ministry of Science and Technology,
Ministry of Commerce, General Administration of Quality
Supervision, Inspection and Quarantine and State Environmental
Protection Administration. With this company got much economic
benefit and social benefit, so it enjoys high popularity and good
credit in the society. The company is composed of Machinery
Factory, Technology Development Center, Decorating Materials
Factory, Handicraft Development Center and Research Institute of
Paint and Coatings, and it establishes cooperative relationship
with Higher Educational Institutions and Scientific Research
Academy in Beijing and Shandong. With perfect scientific research
production base, rich material conditions and technical force and
acute market feeling, the company reformed boldly and strengthened
exchange and cooperation with the world, and at the same time made
its technology and equipment always meet requirements of changing
market. The above let this company ranks as a leading enterprise in
the same industry. In the information times filled with opportunity
and challenge, all employers of our company will abide by the
management ideas of “Take Market as Principle, Take Scientific
Technology as Forerunner” and carry forward the company spirit of
“Only Innovation can bring competitive power and vitality”, to work
towards to key technological breakthroughs and develop industry,
and will exploit, develop and create wonderful tomorrow together
with all friends on the new and high technology road.